|
|
Reversible Traditional Stile & Rail Router Bits |
Reversible Moldura Y Riel |
|
For 3/4" Material |
2 Flute with Ball Bearing Guide |
Cut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each
setup is shown in the drawing. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles. |
|
'A' |
ØD |
B |
B1 |
Ød |
L |
Replacement
Bearing |
Tool No. |
3/8" |
1-5/8" |
11/16" |
7/8" |
1/2" |
3" |
47708 |
460-18 (18!) |
|
Product Information: |
• 1/2" Shank |
• Carbide Tipped |
• Professional Quality |
Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material.
Tongue & Groove can be used on 1/2" through 3/4" material. |
Warning: Maximum RPM (18!)=18,000 |
|
*Use in a table mounted router. Not for use in a handheld router! |
|
|